| title: "@@Brand@@ @@Model@@ @@Version|@@" |
|---|
| # @@Brand@@ @@Model@@ @@Version|@@ |
/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY. */ /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ /* USE https://openwrt.org/meta/create_new_device_page */
Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.
FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the
<WRAP>that encloses it.
/***/ /* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ /***/
FIXME
¶ Getting started with a new Device Page
- This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
- There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
- When there are no more "fixme" tags left, delete this one too, along with the
<WRAP>that encloses it.¶ Keep the articles modular
- Please include only model specific information, omit bla,bla and put everything generic into separate articles
- If you have no time to write certain stuff, link to start
- start should lead the way, do not explain this again
- DO NOT provide a complete howto here! Instead groom the general documentation.
¶ Supported Versions
FIXME
- The tables below are automatically generated, once the correct filters for Brand and Model are set.
- If the tables below show information for
@@Brand@@ @@Model@@ @@Version|@@, everything is OK and you can delete this text and the<WRAP>that encloses it.- If the tables below contain "Nothing found", it means that either
- the dataentry page for @@Brand@@ @@Model@@ @@Version|@@ is missing. Please create a new dataentry page first, then reload this page. The tables should then contain $something. If they do, delete this text and the
<WRAP>that encloses it.- filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please edit this section and adjust the filters with the proper Brand, Model and Version. In case the dataentry does not contain a version, delete the line
filter : Versions~. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the<WRAP>that encloses it.- If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.
<!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
"filterColumns": {"brand": "^@@Brand@@$", "model": "^@@Model@@$", "version": "^@@Version\\|@@$"}
} -->
/* If no unsupported functions known, comment out the following datatable or delete it. */ <!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"shownColumns": ["unsupported_functions"],
"filterColumns": {"brand": "^@@Brand@@$", "model": "^@@Model@@$", "version": "^@@Version\\|@@$"}
} -->
¶ Experimental Versions
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * The official Table of Hardware only lists current, stable versions of OpenWrt. * * Use this space to describe any on-going efforts to create a newer version * * of the firmware for this device. Provide links to firmware images, * * active threads on the forum, or other sources of information. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
None at this time.
¶ Hardware Highlights
<!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],
"filterColumns": {"brand": "^@@Brand@@$", "model": "^@@Model@@$", "version": "^@@Version\\|@@$"}
} -->
¶ Installation
/* stable release */ /* uncomment once stable release is available <!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
"filterColumns": {"brand": "^@@Brand@@$", "model": "^@@Model@@$", "version": "^@@Version\\|@@$"}
} --> */
/* snapshot */ /* delete once stable release is available */ <!-- ToH: {
"source": "json",
"dom": "t",
"paging": false,
"shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"],
"filterColumns": {"brand": "^@@Brand@@$", "model": "^@@Model@@$", "version": "^@@Version\\|@@$"}
} -->
-> Install OpenWrt (generic explanation)
FIXME Please add the installation procedure here.
¶ Flash Layout
FIXME Find out flash layout, then add the flash layout table here (copy, paste, modify the example).
Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.
¶ OEM easy installation
FIXME The instructions below are for Broadcom devices and only serve as an example.
Remove / modify them if they do not apply to this particular device!This section deals with
- How you install OpenWrt from a device freshly opened
- The steps required such as reset to factory defaults if the device has already been configured
Note: Reset router to factory defaults if it has been previously configured.
- Browse to
http://192.168.1.1/Upgrade.asp- Upload .bin file to router
- Wait for it to reboot
- Telnet to 192.168.1.1 and set a root password, or browse to
http://192.168.1.1if LuCI is installed.
¶ OEM installation using the TFTP method
¶ Specific values needed for tftp
FIXME Enter values for "FILL-IN" below
Bootloader tftp server IPv4 address FILL-IN Bootloader MAC address (special) FILL-IN Firmware tftp image Latest OpenWrt release ( NOTE:Name must contain "tftp")TFTP transfer window FILL-IN seconds TFTP window start approximately FILL-IN seconds after power on TFTP client required IP address FILL-IN
¶ Upgrading OpenWrt
FIXME These are generic instructions. Update with your router's specifics.
¶ LuCI Web Upgrade Process
- Browse to
http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/LuCI Upgrade URL- Upload image file for sysupgrade to LuCI
- Wait for reboot
¶ Terminal Upgrade Process
If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:
sysupgrademtdNote: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
¶ sysupgrade
- Login as root via SSH on 192.168.1.1, then enter the following commands:
<!-- -->cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc sysupgrade /tmp/xxx.abc¶ mtd
If
sysupgradedoes not support this router, usemtd.
- Login as root via SSH on 192.168.1.1, then enter the following commands:
<!-- -->cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc mtd write /tmp/xxx.abc linux && reboot
¶ Debricking
¶ Failsafe mode
¶ Basic configuration
-> Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
¶ Specific Configuration
FIXME Please fill in real values for this device, then remove the EXAMPLEs
¶ Network interfaces
The default network configuration is:
Interface Name Description Default configuration br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24 vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP wl0 EXAMPLE WiFi EXAMPLE Disabled
¶ Switch Ports (for VLANs)
FIXME Please fill in real values for this device, then remove the EXAMPLEs
Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.
Port Switch port Internet (WAN) EXAMPLE 4 LAN 1 EXAMPLE 3 LAN 2 EXAMPLE 2 LAN 3 EXAMPLE 1 LAN 4 EXAMPLE 0
¶ Buttons
-> hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.
FIXME Please fill in real values for this device, then remove the EXAMPLEs
The @@Brand@@ @@Model@@ has the following buttons:
BUTTON Event EXAMPLE Reset reset EXAMPLE Secure Easy Setup ses EXAMPLE No buttons at all. -
¶ Hardware
¶ Info
FIXME
- This table is automatically generated, once the correct filters for Brand and Model are set.
- If you see "Nothing." instead of a table, please edit this section and adjust the filters with the proper Brand and Model. Just try, it's easy.
- If you still don't see a table here, or a table filled with '¿': Is there already a Techdata page available for @@Brand@@ @@Model@@ @@Version|@@? If not: Create one.
- If you see a table with the desired device data, everything is OK and you can delete this text and the
<WRAP>that encloses it.- If it still doesn't work: Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.
---- datatemplatelist dttpllist ---- template: meta:template_datatemplatelist cols : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ filter : Brand=@@Brand@@ filter : Model=@@Model@@ filter : Versions=@@Version|@@
¶ Photos
/* =====>>>>> Standard size for photos: add ?400 to the medialink */ /* When uploading photos, name them intelligently. Nobody knows what 20100930_000602.jpg is! */ /* e.g. 
*/ /* Thanks, your wiki administration - Oct. 2015 */
Front:
Insert photo of front of the casing
Back:
Insert photo of back of the casing
Backside label:
Insert photo of backside label
¶ Opening the case
-> Warranty
FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...
- To remove the cover and open the device, do a/b/c
Main PCB:
Insert photo of PCB
¶ Serial
-> port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port
FIXME Replace EXAMPLE by real values.
| Serial connection parameters for @@Brand@@ @@Model@@ @@Version@@ |
EXAMPLE 115200, 8N1, 3.3V |
|---|
¶ JTAG
-> port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
¶ Bootloader mods
-> bootloader
¶ Hardware mods
None so far.
¶ Bootlogs
¶ OEM bootlog
COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE
¶ OpenWrt bootlog
COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING
¶ Notes
Space for additional notes, links to forum threads or other resources.
- ...
¶ Tags
FIXME Add tags below, then remove this fixme.